Makita BKP140 Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Front Base, Base, Foot
DISASSEMBLING
Disassemble Front base and Base (rear side). (Fig. 11)
Fig. 11
1. Remove Knob cover by levering up
with 1R263 inserted into the gap
between Knob cover and Knob.
Knob cover
1R263
Knob
4. Front base can be removed.
Knob cover
M10 Hex nut
Knob
Compression
spring 18
Rubber packing
Front base
2. Remove Retaining ring S-8
with 1R004 or 1R291.
Retaining Ring S-8
Thread portion
1R263
of Front base
3. Use Knob cover as a socket wrench
temporarily for removing M10 Hex nut.
Turn Knob cover counterclockwise
while holding Knob by hand.
M10 Hex nut can be removed from
the thread of Front base.
Knob cover
M10 Hex nut
5. Remove Base (rear) by unscrewing four 4x18
Tapping screws.
4x18 Tapping screw (4pcs.)
Base (rear)
P 7/ 10
M10 Hex nut
Knob
Base (rear)
Foot
Foot
6. Foot can be removed in
separating Base from
Main frame complete.