Makita BKP140 Technical Information page 10

W
iring diagram
Fig. D-3
The Flag connectors have to be connected so that
their wire connecting portions are located over
the mark of + - poles.
Fig. D-4
First, put Controller's lead wires into Lead wire holder.
And then, put Field lead wires (red), (black) on Controller's
lead wires when fixing them with this Lead wire holder.
Wiring to Terminal
Wire connecting
portions
Wiring in Main frame
Put Lead wires into
Lead wire holders.
Switch
Pass Lead wires between these Ribs.
*Line Filter
Slack Lead wires for connecting to
Switch have to be put in this portion.
Rib
Terminal
Controller
Place Field lead wires in this Lead wire
holder, when setting *Line filter to Motor
housing.
*Line filter is not used for some countries.
P 10/ 10