Troubleshooting
The router is in child mode by default and will not function until you run the setup wizard or manually
configure it as a parent node.
You can find more help from our award-winning customer support at Linksys.com/support/E9450.
Your router was not successfully set up
If you could not complete setup in the browser-based interface, you can try the following:
Press and hold the Reset button on your router with a paperclip or pin until the power light
•
on the front of the router turns off and starts blinking (about 10 seconds). Type
192.168.79.1 in a browser to try setup again.
Temporarily disable your computer's firewall (see the security software's instructions for
•
help). Install the router again.
•
If you have another computer, use that computer to install the router.
24