Advertisement
Quick Links
Setting up the Linksys EA9500 and EA9400
Smart Wi-Fi Routers
Setting up the Linksys EA9500 and Linksys EA9400 is made easy using the Smart Setup Wizard
which is embedded in the router's firmware and is available even if the router does not have an
Internet connection yet, or the router is on factory default settings.
NOTE: Before starting the setup, make sure that your router is ready. The router's system boot up
time is approximately 90 seconds. You would know when the router is ready based on its top panel
LEDs. You will see eight (8) solid white bars with the Linksys logo. If the white bars are flashing
quickly, wait until they stay solid.
The following requirements should be met to avoid any problems during the setup process:
Computer Setup:
Latest version of Internet Explorer®, Google Chrome®, Mozilla Firefox®, Safari® (for Mac®
or iPad®), Microsoft Edge
Latest Adobe® Flash® Player
Step 1:
Connect your wireless computer to the default SSIDs which are Linksysxxxxx and
Linksysxxxxx_5GHz where xxxxx is the last five (5) digits of the serial number, while the wireless
password is randomly generated. These credentials are available on your Quick Start Guide and
also printed on the label at the bottom of the router.
NOTE: If you need to set up the router using a hardwired computer, connect your computer into one
of the eight (8) Ethernet ports at the back of the router.
Step 2:
Launch a web browser and enter "linksyssmartwifi.com" in the Address bar then press [Enter].
NOTE: You can also enter "192.168.1.1" or "myrouter.local".
Advertisement
Related Manuals for Linksys EA9400
Summary of Contents for Linksys EA9400
- Page 1 90 seconds. You would know when the router is ready based on its top panel LEDs. You will see eight (8) solid white bars with the Linksys logo. If the white bars are flashing quickly, wait until they stay solid.
- Page 2 Step 3: Tick the checkbox beside I have read and accepted the License Terms for using this software then click Next to proceed. NOTE: Click on the link provided to read more about license terms and other information. If you prefer to manually set up the router, tick the checkbox beside I want to skip Setup and configure my router manually.
- Page 3 For Digital Subscriber Line (DSL) customers, the setup will prompt for a PPPoE Account name and Password from your Internet Service Provider (ISP). Enter the necessary information then click Next to continue.
- Page 4 NOTE: Once an Internet connection is detected, your router will check for firmware updates. Step 5: In the Updates for your router window, the Install future router updates automatically (recommended) is checked by default; this allows for automatic updates in the future. Click Next to proceed.
- Page 5 Step 6: Enter your desired wireless Network Name and wireless Network Password. This will apply for both 2.4 GHz and 5 GHz networks in the fields provided and then click Next. If you need to rename a unique wireless network name for your 5 GHz network, you can do so after setup by logging into the web interface.
- Page 6 NOTE: The password hint is visible when you locally log in to the router, so make sure you don’t use your actual password. After setup, your password hint is now available on the Connectivity tool of your Linksys Smart Wi-Fi Account. You can also change the password hint anytime,...
- Page 7 Your router is now set up. The new Wi-Fi settings and router admin password will be displayed. Click to complete the entire setup. IMPORTANT: Ensure that you write down the new settings for future reference.