Table of Contents
Advertisement
Meters should be installed according to the wiring diagram on terminal box. When inserting, using
copper wire or copper connector will be better.
6.2 Installation instruction details
*
Choose 35mm standard Din-Rail ( the length is confirmed by yourself ), fixed them in the
location which are waiting for installation;
*
Push down the clip under the bottom of the meter for a gear, see fig. 1 and fig.2;
Fig.1
*
Put the meter into the Din-rail as per Fig. 3, then push up the clip for a gear, install meter to the
Din-rail, see Fig. 4;
Fig. 3
*
Making the connection according to the wiring diagram;
Product Manual
Honeywell
| Smart Energy
Elster Kent Metering (Pty) Ltd
60 Commando Road, Industria Ext 2
Johannesburg, 2093
South Africa
Fig.2
Fig. 4
Advertisement
Table of Contents
