5.13 Sunshade Installation
The procedure is the same for the transmitter and receiver.
1. Unscrew the antenna cover from the top of the instrument.
2. Fit the standard (supplied) or stainless steel sunshade (optional) onto the instrument.
3. Ensure the O-ring around the antenna is not damaged and is properly fitted.
4. Screw the antenna cover back.
5. Tighten the antenna cover to a final torque of 5 Nm (3.7 lb-ft).
Figure 17. Sunshade and antenna cover
Searchline Excel™ Plus / Searchline Excel™ Edge – Technical Manual
Chapter 5 Mechanical Installation
29