Advertisement
154568/3208-220
5/17/02
Lubrication
All ball bearings are factory lubricated to last the life of the tool. All sleeve and
needle bearings receive their lubrication from grease in the gear case. Clean
and re-lubricate gear case yearly or whenever servicing requires the gear
case to be removed. Use type and quantity of grease shown on the parts bul-
letin packed with your tool.
IMPORTANT!
To assure product safety and reliability, particularly for double insulated
tools, repairs, maintenance and adjustment (excluding maintenance
described in this manual) should be performed by B&D service centers or
authorized service centers, using identical B&D replacement parts.
Accessories
Recommended accessories for use with your tool are available at extra cost
from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be haz-
ardous.
If you need assistance in locating any accessory call 1-800-9-BD TOOL:
(1-800-923-8665) or contact Black & Decker (U.S.) Inc., Consumer Services
Department, 626 Hanover Pike, P.O. Box 618, Hampstead, MD 21074.
1:36 PM
Page 4
Every B&D tool is of the highest quality.
If you wish to contact us regarding this product, please call toll
free between 8:00am and 8:00pm ET, seven days a week:
1-800-9-BD TOOL
(1-800-923-8665)
One Year Free Maintenance
All B&D tools for Industry and Construction are covered under a one year
free maintenance program where B&D will inspect your tool for safety and
provide necessary maintenance or repairs, including normal wear and tear
parts, for one year, FREE OF CHARGE.
Full Warranty
All B&D tools for Industry and Construction are warranted to be free of any
defects in materials or workmanship. Upon thorough examination of tool,
B&D will repair or replace, at our option, any product that is determined to
be defective.
Conditions
The service/safety check and the warranty do not apply to: repairs made or
attempted by anyone other than an authorized B&D service location; misuse,
abuse, neglect, improper application of the tool; missing parts; or normal wear
and tear (after first year of ownership). Please return the complete unit, trans-
portation prepaid, to any B&D factory owned or B&D authorized service center
location (list provided with tool or see Yellow Pages under "Tools Electric").
Advertisement
