SYSTEM DESCRIPTION AND INSTALLATION MANUAL
C. RF Power Splitter
(1) The RF power splitter divides the signal from the DLNA which is then sent to the SDU
and HSU. The unit weight is 2.5 oz. (70.87 grams). Figure 1-4 shows the RF power
splitter.
D. HSU Mounting Tray
(1) The HS--600 HSU ARINC 600 connector, contacts, and mounting trays can be
purchased from ECS or EMTEQ. The addresses for ECS and EMTEQ are as follows:
Electronic Cable Specialists
5300 W. Franklin Drive
Franklin, WI 53132
U.S.A.
Telephone: (414) 421--5300
Fax: (414) 421--5301
EMTEQ
S84 W. 18693 Enterprise Drive
Muskego, WI 53150
U.S.A.
Telephone: (262) 679--6170 / 1--888--679--6170
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
HS--600 High Speed Data System
Figure 1-4. RF Power Splitter
23- -20- -31
Page 1--13
30 May 2002