Table of Contents
Advertisement
CONFIGURATION MODULE ERRORS
DISPLAYED ERROR
NO VALID CONFIGURATION
NO FLIGHT – OBTAIN
MAINTENANCE
CONFIGURATION MODULE
AND INTERNAL CHECKSUM
FAILURE
NO FLIGHT – OBTAIN
MAINTENANCE
CONFIGURATION MISMATCH
WILL LOAD MODULE DATA
FLIGHT OK- PRESS MIDDLE
BUTTON TO CONTINUE
KFD 840 PG PN 7450-0840-01
Rev C May 28, 2010
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Honeywell Bendix/King KFD 840 Primary Flight Display
DESCRIPTION
There is a problem in the
system configuration that has
been detected on power up.
The display will be locked
and normal operation will not
be possible. If this message
is displayed during ground
operations flight is prohibited.
If this message is displayed
in flight continued flight by
reference
to
instruments will be required.
There is a problem in the
system configuration that has
been detected on power up.
The display will be locked
and normal operation will not
be possible. If this message
is displayed during ground
operations flight is prohibited.
If this message is displayed
in flight continued flight by
reference
to
instruments will be required.
This message is to provide
pilot awareness that there is
a
mismatch
configuration module and the
PFD.
The
module data will be used.
Flight and continued flight is
permitted. It is recommended
obtaining maintenance at the
next available opportunity.
Emergency Operations
the
standby
the
standby
between
the
configuration
10-5
Advertisement
Table of Contents
