Lan To Lan - Draytek Vigor 2700 User Manual

3 . 7 . 6 L A N t o
3 . 7 . 6 L A N t o
Here you can manage LAN-to-LAN connections by maintaining a table of connection profiles.
You may set parameters including specified connection direction (dial-in or dial-out),
connection peer ID, connection type (ISDN connection, VPN connection - including PPTP,
IPSec Tunnel, and L2TP by itself or over IPSec) and corresponding security methods, etc.
The router provides up to 32 profiles, which also means supporting 32 VPN tunnels
simultaneously. The following figure shows the summary table.
Besides, you can connect two networks through ISDN connection (for i model only). The way
to set profile (for dial-in and dial-out) for ISDN connection is the same as VPN tunnel setting
profile.
Set to Factory Default
Name
Status
Click each index to edit each profile and you will get the following page. Each LAN-to-LAN
profile includes 4 subgroups. If the fields gray out, it means you may leave it untouched. The
following explanations will guide you to fill all the necessary fields.
For the web page is too long, we divide the page into several sections for explanation.
88
L A N
L A N
Click to clear all indexes.
Indicate the name of the LAN-to-LAN profile. The symbol ???
represents that the profile is empty.
Indicate the status of individual profiles. The symbol V and X
represent the profile to be active and inactive, respectively.
Vigor2700 Series User's Guide