Sip Accounts - Draytek Vigor 2700 User Manual

Then, check the Enable box to make the PSTN number available for dial whenever you need.
Note: This function is available for Vigor2700V/2700VG (MODULE 2S1L) only.
3 . 9 . 2 S I P A c c
3 . 9 . 2 S I P A c c
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an Account Name or user name, SIP Registrar, Proxy, and
Domain name. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in Account Name@ Domain name
As Vigor VoIP Router is turned on, it will first register with Registrar using
AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to the
destination using AccountName@Domain/Realm as identity.
Index
Profile
Domain/Realm
Proxy
Account Name
Ring Port
STUN Server
Vigor2700 Series User's Guide
o u n t s
o u n t s
Click this link to access into next page for setting SIP account.
Display the profile name of the account.
Display the domain name or IP address of the SIP registrar
server.
Display the domain name or IP address of the SIP proxy server.
Display the account name of SIP address before @.
Specify which port will ring when receiving a phone call.
Type in the IP address of the STUN server.
105