Panel Explanation - Draytek Vigor 3300 Quick Start Manual

2 . P a n e l E
2 . P a n e l E
The displays of LED indicators for the routers are different slightly.
2 . 1 L E D I n d i c
2 . 1 L E D I n d i c
Factory Reset:
Used to restore the default settings. Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual,
release the button. Then the router will restart with the factory default configuration.
LED
PWR
ACT
VPN
Firewall
QoS
LNK
100
LAN
(1, 2, 3, 4)
FDX
LNK
WAN/DMZ
(1, 2, 3, 4)
100
Vigor3300 Series Quick Start Guide
x p l a n a t i o n
x p l a n a t i o n
a t o r s a n d C o
a t o r s a n d C o
Status Explanation
On The router is powered on.
Off The router is powered off.
On/Blinking The system is active.
Off The system is hanged.
On The VPN tunnel is launched.
Off The VPN tunnel is closed.
On The Firewall function is active.
Off The Firewall function is inactive.
On The QoS function is active.
Off The QoS function is inactive.
On The Ethernet link is established on corresponding port.
Off No Ethernet link is established.
On It means that a normal 100 Mbps connection is through
its corresponding port.
Off It means that a normal 10 Mbps connection is through its
corresponding port.
On It means a full duplex connection on corresponding port.
Off It means a half duplex connection on corresponding port.
On The Ethernet link is established.
Blinking The data transmission is done through the corresponding
port.
Off No Ethernet link is established.
On It means that a normal 100Mbps connection is through its
corresponding port.
n n e c t o r s f o r
n n e c t o r s f o r
V i g o r 3 3 0 0 V
V i g o r 3 3 0 0 V
3