Draytek Vigor 2950 User Manual page 43

2. Click the LAN - Static Route and click on the Index Number 1. Check the Enable
box. Please add a static route as shown below, which regulates all packets destined to
192.168.10.0 will be forwarded to 192.168.1.2. Click OK.
3. Return to Static Route Setup page. Click on another Index Number to add another
static route as show below, which regulates all packets destined to 211.100.88.0 will be
forwarded to 192.168.1.3.
4. Go to Diagnostics and choose Routing Table to verify current routing table.
Vigor2950 Series User's Guide
Note: There are two reasons that we have to apply RIP Protocol Control on
1st Subnet. The first is that the LAN interface can exchange RIP packets
with the neighboring routers via the 1st subnet (192.168.1.0/24). The second
is that those hosts on the internal private subnets (ex. 192.168.10.0/24) can
access the Internet via the router, and continuously exchange of IP routing
information with different subnets.
37