Makita HM1802 Instruction Manual page 6

OPERATION
Chipping/Scaling/Demolition
CAUTION:
• Keep well-balanced posture when holding the
heavy tool before / during / after operation to
avoid personal injuries.
• Secure debris in case of breaking it into smaller
pieces.
• Hold the tool firmly with both hands. Turn the
tool on and apply slight pressure on the tool
so that the tool will not bounce around, uncon-
trolled. Pressing very hard on the tool will not
increase the efficiency.
• Do not pull out the tool if stuck. Instead, break
the work around the bit tip.
• Be sure to place the tool on the stable floor or
ground after use.
► Fig.8
Always use the soft grip (auxiliary handle) and firmly
hold the tool by both side grip and switch handle during
operations.
MAINTENANCE
CAUTION:
• Store the machine in horizontal position to avoid
possible grease leakage.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product safety and reliability, repairs,
any maintenance or adjustment should be performed
by Makita Authorized Service Centers, always using
Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Bull point
• Cold chisel
• Scaling chisel
• Clay spade
• Rammer
• Safety goggles
• Hammer / bit grease
• Dust extractor attachment
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
6 ENGLISH