Makita HM1800 Instruction Manual
Hide thumbs
Also See for HM1800:
- Instruction manual (33 pages) ,
- Parts breakdown (5 pages) ,
- Instruction manual (33 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita HM1800
Summary of Contents for Makita HM1800
- Page 1 Breaker Hammer MODEL HM1800 002884 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets Director without earth wire. MAKITA INTERNATIONAL EUROPE LTD. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For safe operations: tion and changing accessories. - Page 4 ADDITIONAL SAFETY RULES FOR TOOL ENB009-1 Hold tools by insulated gripping surfaces when In cold weather or when the tool has not been performing an operation where the cutting tool used for a long time, let the tool warm up for a may contact hidden wiring or its own cord.
-
Page 5: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 002892 CAUTION: • Before plugging in the tool, always check to see that the switch lever actuates properly and returns to the “OFF”... -
Page 6: Operation
(2) For bits without a collar 002931 Fig.(2) 1. Notched portion 2. Tool retainer shaft 3. Cylinder 4. When the bit is inserted 5. When the bit is retained Pivot the tool retainer front and slightly downward. With the notched por- tion of the bit facing the tool retainer shaft, insert the bit into the tool holder as far as it will go. - Page 7 This tool requires no hourly or daily lubrication because it has a grease- packed lubrication system. It should be relubricated after every 6 months of operation. Send the complete tool to Makita Authorized or Factory Service Center for this lubrication service. However, if circumstances require that you should lubricate it by yourself, proceed as follows.
- Page 8 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 9 Memo...
- Page 10 Memo...
- Page 11 Memo...
- Page 12 Makita Corporation Anjo, Aichi, Japan 883829G223...