Table of Contents
Advertisement
B Troubleshooting
B.1 Introduction
This appendix is divided into a number of sections, each with it's own specific troubleshooting tips:
1.
Common Troubleshooting Tips - B.2
•LED Activity - section B.2.1
•Can Not Connect To The Network - section B.2.2
•LEDs Work But Cannot Connect to Network - section B.2.3
•Cannot Edit Configuration Profile - section B.2.4
•Cannot find the LAN card - section B.2.5
•It takes a long time to shutdown - section B.2.6
•WLI-USB-L11G does not operate after returning from the stand-by or sleeping mode - section B.2.7
•The PC cannot restart while WLI-USB-L11G is installed under W98 - section B.2.8
2.
•Upgrading the Driver - section B.3.2
3.
•"There is another card installed" message - section B.4.3
•The PC with WLI-USB-L11G cannot access to W2k or NT4.0 logon process - section B.4.4
4.
B.2 Common Troubleshooting Tips
B.2.1 LED Activity
If you encounter difficulty using and/or installing your AirStation product, the error may be related to
various causes:
• Out-of range situation, which prevents the AirStation USB Client from establishing a wireless
connection with the network.
• Configuration mismatch, which prevents the AirStation USB Client from establishing a wireless
connection with the (correct) network.
• Absence of, or conflict of the AirStation Driver.
• A problem or conflict with the USB Client connector which prevents the USB Client from
powering on.
• A conflict of the AirStation hardware with another device.
17
Advertisement
Chapters
Table of Contents
Troubleshooting
