Using The Client Manager - Buffalo WLI-USB-L11G User Manual

4. To display other workgroups in the network environment, double-click the Entire
Network icon.
5. If there is a second network operating system running in your network environment (for example
a Novell NetWare network), the "Entire Network" window, will also display available servers
running under the second network operating system. If you click on these servers, you may be
asked to enter your user name and password that apply to the other network operating system.
If you cannot find other (AirStation) networked computers, verify whether the other AirStation
computers are:
• Powered up and logged on to the network.
• Configured to operate with identical Microsoft Network settings concerning:
•Using the same Networking Protocol
•Share the same Wireless Network Name
•Share the same Workgroup Name
To view or modify the Station Name or Workgroup of your computer, proceed as follows:
1. Click the Start button on the Windows task bar
2. Click on Settings, and then on Control Panel
3. In the Control Panel window, double-click the Network icon
4. In the Network Settings window, select the Identification tab. You can verify and change
the Station Name or Workgroup parameters.
NOTE:
You have to restart your computer before changes to the Network Settings will be effected. To verify
the radio connection with other stations refer to "View Wireless Link Quality."

3.4 Using the Client Manager

If you installed the AirStation Client Manager, you can use the Client Manager to:
• Verify the quality of your wireless connection to the network.
• View/Modify the configuration settings of your wireless USB Client.
The Client Manager will start automatically every time you power up your computer. The Client
Manager icon is displayed in your Windows screen.
• Click the icon once with your left mouse button to retrieve a more detailed status overview.
• Click the icon once with your right mouse button to display a menu with more options.
View Wireless Link Quality
You can use the Client Manager "test connection" to verify the link quality of your network connection.
11