Casio Casiotone CT-S400 User Manual page 173

Symptom
Nothing happens when I start playing a
song's Auto Accompaniment.
The metronome does not sound.
Notes keep sounding, without stopping.
Some notes are cut off while they are
playing.
The volume level or tone setting I
configured has changed.
With certain volume levels and tones,
the sound of notes played in one
keyboard range will sound different from
those played in another keyboard
range.
With some tones, octaves do not
change at the far ends of the keyboard.
The pitch of the notes does not match
other accompanying instruments or
notes sound strange when played along
with other instruments.
The reverb of notes seems to change
suddenly.
Required Action
• It takes a little time after you press the button until the
song starts to play. Wait for the song to start.
• Check and adjust the song volume level (page
EN-79).
• Song play does not start if a is pressed while there
is no song data stored in song numbers 161 through
178 (page EN-85, EN-116).
• Try turning the Digital Keyboard off and then back on
again (page EN-23) to initialize settings.
• Check and adjust the metronome volume level (page
EN-29).
• Try turning the Digital Keyboard off and then back on
again (page EN-23) to initialize settings.
• Try turning the Digital Keyboard off and then back on
again (page EN-23) to initialize settings.
• Replace the batteries with new ones. Or use AC
adaptor power (page EN-8).
This happens whenever the number of notes being
sounded exceeds the maximum polyphony value of 48
(24 for some tones). It does not indicate malfunction.
• Adjust the volume level (page EN-25).
• Try turning the Digital Keyboard off and then back on
again (page EN-23) to initialize settings.
• Replace the batteries with new ones. Or use AC
adaptor power (page EN-8).
This is due to system limitations and does not indicate
malfunction.
This is due to system limitations, and does not indicate
malfunction.
• Check and adjust the transpose setting (page EN-60)
and tuning setting (page EN-61).
• Try turning the Digital Keyboard off and then back on
again (page EN-23) to initialize settings.
• Check and adjust the reverb setting (page EN-40).
• Try turning the Digital Keyboard off and then back on
again (page EN-23) to initialize settings.
EN-172
Reference