Adjusting The Self-Propel Drive; Preparing The Battery Pack For Recycling; Storage - Toro Flex Force Power System 60V MAX 22in Recycler Operator's Manual

Table of Contents

Advertisement

Adjusting the Self-Propel
Drive
For Self-Propel-Drive Models Only
Whenever you install a new self-propel cable or if
the self-propel drive is out of adjustment, adjust the
self-propel drive.
1.
Turn the adjustment nut counterclockwise to
loosen the cable adjustment
Figure 25
1. Handle (left side)
2. Adjustment nut
3. Self-propel-drive cable
2.
Adjust the tension on the cable
pulling it back or pushing it forward and holding
that position.
Note:
Push the cable toward the motor to
increase the traction; pull the cable away from
the motor to decrease the traction.
3.
Turn the adjustment nut clockwise to tighten the
cable adjustment.
Note:
Tighten the nut firmly with a socket or
wrench.
Preparing the Battery Pack
for Recycling
Important:
Upon removal, cover the terminals of
the battery pack with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble the
battery pack or remove any of its components.
Contact your local municipality or your authorized Toro
distributor for more information on how to responsibly
recycle the battery.
(Figure
25).
g269307
4. Turn the nut clockwise to
tighten the adjustment.
5. Turn the nut
counterclockwise to
loosen the adjustment.
(Figure
25) by

Storage

Important:
Store the machine, battery pack, and
charger only in temperatures that are within the
appropriate range; refer to
11).
Important:
If you are storing the machine for a
year or longer, remove the battery pack from the
machine and charge the battery pack until 2 or
3 LED indicators turn green on the battery. Do
not store a fully charged or fully depleted battery.
When you are ready to use the machine again,
charge the battery pack until the left indicator light
turns green on the charger or all 4 LED indicators
turn green on the battery.
Disconnect the product from the power supply (i.e.,
remove the battery pack) and check for damage
after use.
Clean all foreign material from the product.
When not in use, store the machine, electric-start
button, battery pack, and battery charger out of the
reach of children.
Keep the machine, battery pack, and battery
charger away from corrosive agents, such as
garden chemicals and de-icing salts.
To reduce the risk of serious personal injury, do
not store the battery pack outside or in vehicles.
Store the machine, battery pack, and battery
charger in an enclosed clean, dry area.
21
Specifications (page

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2036320363t2036620366t

Table of Contents