Removing the Grass Bag
To remove the bag, reverse the steps in
Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
•
To bag the grass and leaf clippings, press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(Figure
13).
Figure 13
1. Bag-on-demand lever (in
the recycling position)
Side-Discharging the Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the machine and the bag-on-demand lever is in the Bagging position, move the lever to
the Recycling position; refer to
Installing the Side-Discharge Chute
Unlatch and lift up the side deflector and install the side-discharge chute
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side deflector, remove the side-discharge chute, and lower
the side-discharge deflector until it latches securely.
Installing the Grass Bag (page
g251583
2. Bag-on-demand lever (in
the bagging position)
Operating the Bag-on-Demand Lever (page
14).
•
To recycle or side-discharge the grass and
leaf clippings, press the button on the lever and
move the lever rearward until the button on the
lever pops up.
Important:
any grass clippings and debris from the
bag-on-demand door and the surrounding
opening
(Figure
bag-on-demand lever from 1 position to
another.
1. Clean here
(Figure
Figure 15
15
For proper operation, remove
14) before you move the
Figure 14
15).
15).
g251584
g233435