Advertisement
Available languages
Available languages
OPERATION
Blowing Feature
Your Vac features a Blowing Port. It can
blow sawdust and other debris. Follow the
steps below to use your Vac as a Blower.
1. Locate the Blowing Port, at the rear of
the Powerhead of your Wet/Dry Vac.
2. Insert
the
Professional Locking Hose into the
Blowing Port of the Vac. Engage the
Professional Locking Hose Latch
to the lip of the Blowing Port. The
Profes-sional Locking Hose should
snap into place.
3. (Optional) Attach the Extension Wand
to swivel end of the Hose.
4. Turn the Vac on and you are ready to
use your Vac as a Blower.
SP7064 RT0600M0 SE 2019.indd 26
larger
end
of
the
WARNING:
Always
wear
complying with ANSI Z87.1 (or in
Canada, CSA Z94.3) before using as
a blower.
WARNING:
To reduce the risk of injury to
bystanders, keep them clear of
blowing debris.
CAUTION:
Wear a dust mask if blowing creates
dust which might be inhaled.
CAUTION:
To reduce the risk of hearing damage,
wear ear protectors when using the
Vac/Blower for extended time or in a
noisy area.
Blowing
Port
Professional
Locking Hose
26
safety
eyewear
Extension
Wand
(Optional)
1/30/19 7:36 AM
Advertisement
