DSL-500 ADSL Router User's Guide
PVC
Use this field to assign the VPI and VCI values for the Router. These numbers
are given to you by your ISP provider and must be entered correctly in order to
establish the ADSL connection. If these values are not correct the connection will
not be successful.
PPPoE Login
Use this field to assign a Login User Name and Password used to access to
your ISP's network.
PPPoE Information
This field provides information regarding the status of the Router connection to
the ISP's network. The ISP's DHCP server should assign the global IP Address
for the Router automatically. The Connection Status will read Disconnect until
you are connected to the ISP's WAN.
Connect to WAN
Once you have entered all the PVC and PPPoE Login values, click the Connect
button to initiate the PPP connection via the ADSL WAN interface. The
"handshake" process will take a few seconds. When the connection is established
the status will be indicated in the PPPoE Information field.
DHCP
DHCP Configuration Window
15