Pppoe Configuration - D-Link DSL-500 User Manual

DSL-500 ADSL Router User's Guide

PPPoE Configuration

The PPPoE connection method used by the Router is Point-to-Point-Protocol over
Ethernet (PPPoE) as defined in RFC 2516. Use the PPPoE Configuration window
to define the PVC by configuring the VPI and VCI values given to you by your
DSL service provider. PPP also allows you to use the security protocols PAP or
CHAP to help protect your network from unwanted intruders. This window is
used to assign the user name and password used to access your network or
server. When you have set the correct VPI and VCI settings and entered the user
name and password, click the Connect button to establish the ADSL connection
to your ISP's network. The window is also used to terminate the Router's ADSL
connection and change connection methods.
If you wish to change the connection method (to Bridged Ethernet over IP),
please read the section on Connection Method later in this chapter.
To bring up the PPPoE Configuration window, click on the PPPoE Configuration
menu button and the following screen will appear:
PPPoE Configuration Window
14