D-Link DSL-500 Quick Install Manual
D-link dsl-500 : install guide
Hide thumbs
Also See for DSL-500:
- User manual (78 pages) ,
- Command reference manual (15 pages) ,
- Quick start manual (11 pages)
Related Manuals for D-Link DSL-500
Summary of Contents for D-Link DSL-500
- Page 1 DSL-500/CZ DSL-500/CZ ADSL Router ADSL Router Quick Install Guide Quick Install Guide...
-
Page 2: Quick Install Guide
(Follow all installation instructions provided by the manufacturer.) If you have had a service technician install your DSL line, please skip to Step 4: “Connecting the DSL-500/CZ.” If you are installing DSL yourself, please follow all instructions. Install a “Z-Blocker” phone filter at Install a “Z-Blocker”... - Page 3 2-line adapter into the wall jack. lPlug the RJ-11 cable into one adapter jack. lPlug the LINE end of a “Z-Blocker” filter into the other adapter jack. lPlug your telephone devices into the PHONE jack on the “Z-Blocker” filter. DSL-500/CZ...
- Page 4 Installing the “Z-Blocker” filter on a Installing the “Z-Blocker” filter on a wall-mounted telephone, using the wall-mounted telephone, using the wall-mount filter wall-mount filter lRemove the phone. On some phones you must pull out a locking lever before removing the phone. Then push up on the phone and pull it out from the wall.
- Page 5 Filter Installation Tips Filter Installation Tips DO NOT install a filter on your DSL modem or on any broadband devices. Check the orientation of each filter PHONE jack towards the telephone device. LINE connection towards the wall jack. Try to limit the number of filters in your home to the fewest practical. Do this by Using one filter to isolate several devices.
- Page 6 DSL-500/CZ’s Ethernet port, and the other end into the Ethernet port on the NIC installed in your PC. If the cable connection is good, a green LED on the front of the DSL-500/CZ labeled Ethernet/Link will glow steadily.
- Page 7 Now connect the phoneline cable from the DSL-500/CZ to your phone jack. If the ADSL Link LED does not glow green within one minute of its being connected, check all of your cable connections to make sure that they are correct and securely installed.
-
Page 8: Setting Up The Computer
Setting up the Computer Setting up the Computer Right-Click the Network Neighborhood (Win 98/98SE) or My Network Places (Win ME/2000) icon on your desktop. Click Properties Highlight the line that reads TCP/IP and points to your installed Ethernet NIC. Click Properties At this screen, select the IP Address tab. - Page 9 You will be prompted to reboot in Win 98/98SE or ME. Click Yes For Windows 2000, Restart your computer manually. When your computer restarts, you will automatically receive an IP address from the DSL-500/CZ. Accessing the DSL-500/CZ’s Web Based Accessing the DSL-500/CZ’s Web Based Management Management The DSL-500/CZ requires Internet Explorer 4.0 or higher, or...
- Page 10 Configuring the DSL-500/CZ Configuring the DSL-500/CZ Click PPPoA Configuration in the left column. Enter the Login User Name and Password, provided to you by your Internet Service Provider (ISP.) Authentication is set to detect automatically. If your current selection does not work, select “pap.”...
- Page 11 Configuration Click on Restart Note: Do not manually restart the modem. It will automatically restart by itself. Once you are finished with your installation, you should be able to access the Internet. You have completed the installation of the DSL-500/CZ.
-
Page 12: Troubleshooting
Verify that the "Link" LEDs under both the ADSL and Ethernet headings on the front of your DSL-500/CZ are glowing a steady green. If they are not lit, try using a different cable. You may also need to use a different kind of cable.