Advertisement
Multiple-Adapter Installation
Multiple DE-220P Series cards may be installed in
a computer to provide for multiple addresses, or in
the case of a server, to provide for network seg-
mentation.
Multiple Cards in a PnP System
No
special
multiple DE-220P Series cards in a PnP-compliant
system (so long as Plug and Play is enabled
stall the several cards into their expansion slots,
following the four steps set out in the "Single-
Adapter Installation" section above (repeating
2 and 3 for each card). When computer
switched on, the PnP system will auto-
coordinated (conflict-free)
several cards.
3 Plug and Play functionality of the NOS may be toggled between
enable and disable by a selection in your setup.exe run.
Installation
DE-220P Series Ethernet Adapter / User's Guide
attention
is
needed
when
matically select
configuration settings for the
installing
3
).
In-
steps
power is
9
Advertisement
