System Requirements; Wireless Basics - D-Link Air DCF-650W Manual

System Requirements

In order to use the D-Link Air DCF-650W Wireless Compact Flash Adapter, the
desktop or laptop computer used to "sync" the PDA must be equipped with the
following:
"Microsoft Active Sync" software (Software that came with your PDA)

Wireless Basics

Your new D-Link Air product is based on industry standards to provide easy to use
and compatible high-speed wireless connectivity within your home or business.
Strictly adhering to IEEE 802.11b, the D-Link Air family of products will allow you
to access the data you want, when and where you want it. No longer will you be
tethered to a workstation or forced to run new wiring. You will be able to enjoy the
freedom that wireless networking delivers.
Standards Based Technology
Based on IEEE 802.11b, D-Link Air products can perform up to 11 Megabits per
second. This means you will be able to transfer large files quickly or even watch a
Movie in MPEG format over your network without noticeable delays. This
technology works by using multiple frequencies in the 2.4GHz range utilizing Direct
Sequence Spread Spectrum (DSSS) technology. D-Link Air products will
automatically sense the best possible connection speed to ensure the greatest speed
and range possible with the technology.
Installation Considerations
Designed to go up to 800 feet in an open environment, the D-Link DCF-650W lets
you access your network from anywhere you want. However, keep in mind, that the
effective range of any wireless product will be limited by the number of walls,
ceilings, or other objects that the wireless signals must pass through. Typical ranges
may vary depending on the types of materials and background RF noise in your
home or business. The key to maximizing range is to follow these basic principles:
1. Keep the number of walls and ceilings to a minimum - Each wall or ceiling can
reduce the effective range of D-Link Air Wireless product by a distance of three
to ninety feet. Position your Access Points, Residential Gateways, and
computers so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between Access Points, Residential Gateways, and
Computers - A wall that is 1.5 feet thick, at a 45 degree angle, appears to be
almost 3 feet thick. At a 2-degree angle it looks over 42 feet thick! Try to make
sure that the Access Point and Adapters are positioned so that the signal
6