D-Link DCF-650WK Quick Install Manual page 10

Click Finish to finish the installation.
Next, go to
START>PROGRAMS>D-LINK
Wireless LAN Utility>DCF-650WK
Utility. The DCF-650WK icon will
appear in the system tray in the
bottom right of your laptop screen.
You will click on this icon to access
the Configuration Utility.
The
*
Compact Flash Converter is a
"ready-to-use" device. Its default
settings are compatible with a
typical Infrastructure
LAN. If you choose to adjust the
settings, please refer to the Wireless
LAN Compact Flash Card User's
Manual for details.
Installing the Pocket PC Wireless
LAN Utility
Please make sure that you have installed Microsoft Active Sync software on
your laptop. This is the software that came with your PDA.
1. Establish a connection between host PC and PDA device by Microsoft
Active Sync program.
2. Run DCF-650WLAN_PocketPC.exe from the Pocket PC Utility folder
to install the driver and utility for the PDA.
3. Insert the 11Mbps Wireless LAN Compact Flash Card into the compact
flash slot of your PDA. The PDA will auto-detect the Wireless LAN
Compact Flash Card and automatically install the corresponding driver .
4. Assign an IP address to your Wireless LAN Compact Flash Card. You
may either choose to give a fixed IP address or have the Wireless LAN
Compact Flash Card automatically obtain an IP address from your
DCF-650W Wireless
Wireless
10