Samsung CY-SWR1100 User Manual page 62

The following parameters can be configured:
Enable Auto-Configura-
tion:
Auto-Configuration Type:
Router Advertisement
Lifetime:
IPv6 Address Range
(Start):
IPv6 Address Range
(End):
IPv6 Address Lifetime:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
S W r u
amSung ireleSS outer Ser
The user can tick this option to enable the auto-configuration feature.
The user can select the auto-configuration type used here. Options to choose from are
Stateless or Stateful (DHCPv6).
This option is only available when the auto-configuration type is set to Stateless. Enter
the router advertisement lifetime value used here.
This option is only available when the auto-configuration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for your local computers.
This option is only available when the auto-configuration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for your local computers.
This option is only available when the auto-configuration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
m
anual
P 62
age