Table of Contents
Advertisement
Workgroup Bridge
Workgroup Bridge feature enables the access point to extend the accessibility of a remote network.
In Workgroup Bridge mode, the access point acts as a wireless station (STA) on the wireless LAN. It
can bridge traffic between a remote wired network and a wireless LAN.
When Workgroup Bridge is enabled, SSID configuration still works to provide wireless
services to clients.
All access points participating in Workgroup Bridge must have the identical settings for Radio
interface, IEEE 802.11 mode, Channel Bandwidth, Channel (Auto is not recommended).
Data - Workgroup Bridge Screen
Workgroup Bridge
Radio
Select the desired radio from the list.
Workgroup Bridge Status
Enable or disable Workgroup Bridge function.
Status
Before configuring Workgroup Bridge, make sure all devices in
Workgroup Bridge have the following identical settings.
Infrastructure Client Interface
Enter the name of the SSID to which Workgroup Bridge will connect.
SSID
Click Site Survey button to choose from the list. It's necessary for
Workgroup Bridge to connect to remote access point.
Figure 30: Workgroup Bridge
•
Radio
•
IEEE 802.11 Mode
•
Channel Bandwidth
•
Channel (Auto is not recommended)
41
Advertisement
Table of Contents
