Table of Contents
Advertisement
Time Screen
Click Time on the Administration menu to configure system time of the device.
Data - Time Screen
Time
Display current date and time of the system.
Current Time
Manually
Set date and time manually.
Automatically
When enabled (default setting) the access point will get the current
time from a public time server.
Time Zone
Choose the time zone for your location from the drop-down list. If
your location observes daylight saving time, enable "Automatically
adjust clock for daylight saving changes."
Start Time
Specify the start time of daylight saving.
End Time
Specify the end time of daylight saving.
Select the adjusted time of daylight saving.
Offset
NTP
NTP Server 1
Enter the primary NTP server. It can be an IPv4 address or a domain
name.
Valid characters include alphanumeric characters, "_", "-" and ".".
Maximum length is 64 characters.
NTP Server 2
Enter the secondary NTP server. It can be an IPv4 address or a domain
name.
Valid characters include alphanumeric characters, "_", "-" and ".".
Maximum length is 64 characters.
Figure 10: Time Screen
10
Advertisement
Table of Contents
