Closemount Instructions - Honeywell PALM ISLAND Manual

13. Remove the canopy cover from the bottom of the
canopy (Fig. 13).
Helpful Hint: Closemount-style mounting is more
suitable for ceilings lower than 8 ft. (2,44 m) high.
The downrod and canopy cover are not used in this
type of installation.
14. Align the canopy with the closemount screw
holes in the top of the motor assembly. Secure
the canopy to the top of the motor assembly by
installing three closemount screws and spring
washers into the top of the motor housing (Fig. 14).
Closemount Screw
15. Raise the fan and place the canopy on the hook
located on the mounting bracket for wiring (Fig. 15).

CLOSEMOUNT INSTRUCTIONS

Spring Washer
Fig. 13
Fig. 14
Spring
Washer
Fig. 15
10
Canopy
Cover
Closemount
Screws
Canopy
Canopy
Hook