Conferencing Calls - Cisco SPA525G2 Owner's Manual

Conferencing Calls

You can create a conference with other parties using the phone's local conference
feature. There are two ways to do this.
• Joining two calls
• Adding calls
Joining Calls
You can create a conference at any time between an active call and a
call on hold by pressing Conf Line on the display. The Conf Line function is
only available if you have only two calls on your phone.
To join two calls:
1. Have one call on hold while talking to another
2. Press > on the arrow pad and then press Conf Line. You will then
be connected to both callers.
Splitting Joined Calls
After you have joined two calls, you may split those calls back to their individual
calls.
To split a Joined call:
Press the hold soft key to split the joined calls.
All calls are split into individual calls and put on hold.
Setting Up Conference Calls
You may conference up to two calls plus yourself (a 3-way call).
To set up a conference call:
1. Call the first party.
2. Press the conf to create a new call.
3. Call the second party. You must press the Conf Line soft key again to join
both callers.
20