Aastra 6863i Quick Start Manual

Quick Start Guide
Aastra 6863i
Installing Your Handset
The box for your handset will contain a number of
items:
 The main handset chassis
 A plastic 'foot' which should be attached to
the base of the chassis
 A handset receiver
 A curly wire to attach the receiver to the
main chassis
 An RJ45 Ethernet cable to connect the
handset to your local network
If you have ordered a power supply unit (PSU) then
this will be provided separately. Note that the
phone does not need a PSU if your network
supports power over Ethernet (POE).
Telephone 0800 987 8000
Inclarity Communications Ltd. Unit G16 The Perfume Factory, Wales Farm Road, London W3 6UG
v1 20/01/2015
Email customerservices@inclarity.co.uk
The phone has a second Ethernet port which can be
used to attach another device (e.g. your PC) to the
same network port in your office.
Once the handset is powered and connected to
your network it should boot up ready for use, with
the correct extension number, date and time
displayed on the screen.
In the event that the handset does not boot up
correctly then please contact our Support team.
Web www.inclarity.co.uk