Specifications - Makita BUH481 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Blade length
-1
Strokes per minute (min )
Rated voltage
Overall length
Net weight
Battery cartridge
Battery charger
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Do not expose to rain.
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Noise
The typical A-weighted
according to EN60745:
Model BUH481,BUH483,BUH521
Sound pressure level (L
Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).
BUH481
480 mm
D.C. 14.4 V
869 mm 881 mm
3.0 kg 3.1 kg
BL1415 BL1430
noise level determined
) : 75 dB(A)
pA
BUH483
1,350
D.C. 18 V
873 mm 888 mm
3.0 kg 3.2 kg
BL1815 BL1830
DC18RC,DC18SD
END013-3
Model BUH523
Sound pressure level (L
Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration
determined according to EN60745:
Work mode : hedge trimming
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
ENE014-1
The vibration emission during actual use of the
•
power tool can differ from the declared emission
ENG905-1
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
BUH521
520 mm
D.C. 14.4 V
919 mm 931 mm
3.0 kg 3.2 kg
BL1415 BL1430
) : 77 dB(A)
pA
Wear ear protection
total value (tri-axial
) : 2.5 m/s
h
2
BUH523
D.C. 18 V
923 mm 938 mm
3.1 kg 3.3 kg
BL1815 BL1830
ENG900-1
vector sum)
2
or less
ENG901-1