Specifications - Makita DKP140 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Shiplapping depth
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives,
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for planing wood.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DKP140
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DKP180
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model
Planing width
Planing depth
-1
)
Overall length
Net weight
Rated voltage
of the
on Waste Electric
) : 80 dB (A)
pA
) : 84 dB (A)
pA
) : 95 dB (A)
WA
D.C. 14.4 V
END004-6
Vibration
The vibration
determined according to EN60745:
Model DKP140
Work mode : planing softwood
Vibration emission (a
European
Uncertainty (K) : 1.5 m/s
and
Model DKP180
Work mode : planing softwood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
ENE001-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
ENG905-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
DKP140
82 mm
1.6 mm
9 mm
15,000
329 mm
3.3 kg
Wear ear protection
total value
) : 3.5 m/s
h
2
) : 4.5 m/s
h
2
DKP180
2 mm
333 mm
3.4 kg
D.C. 18 V
ENG900-1
(tri-axial vector sum)
2
2
ENG901-1