Table of Contents
Advertisement
6. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
END
Turn the adjustment knob to extend the cooking time
by setting a new duration. In both cases, the cooking
parameters will be retained.
Once the food has been removed, leave the oven
cooling down with the door closed.
BROWNING
Some functions of the oven enable you to brown
the surface of the food by activating the grill once
cooking is complete.
PRESS v TO BROWN
When the display shows the relevant message, if
required press
to start a five-minute browning cycle.
You can stop the function at any time by pressing
by turning the selection knob to "0" to switch the oven
off.
. FAVORITE
Once cooking is complete the display will prompt you
to save the function in a number between 1 and 10
on your list of favorites.
ADD FAVORITE?
If you would like to save a function as a favorite and
store the current settings for future use, press
otherwise, to ignore the request press
been pressed, turn the adjustment knob to select the
number position, then press
Please note: If the memory is full or the number chosen has
already been taken, the oven will ask you to confirm
overwriting the previous function.
To call up the functions you have saved at a later
time, turn the function knob to
show your list of favorite functions.
1. CONVENTIONAL
Turn the adjustment knob to select the function,
confirm by pressing
6
. Once
to confirm.
: The display will
, and then press
to activate.
. SMART CLEAN FUNCTION
Turn the function knob to
the display.
Smart clean
Press
to activate the function: the display will
prompt you to do all actions needed to obtain the
best cleaning results: Follow the indications and then
press
when done. Once you have done all steps,
when required press
Please note: It is reccommended to do not open the oven
door during the cleaning cycle to avoid a loss of water vapor
that could get an adverse effect on the final cleaning result.
An appropriate message will start flashing on the
display once the cycle has finished. Leave the oven to
cool and then wipe and dry the interior surfaces with
a cloth or sponge.
. MINUTEMINDER
When the oven is switched off, the display can be
used as a timer. To activate this function, make sure
that the oven is switched off and turn the adjustment
or
knob: The
icon will flash on the display.
Turn the adjustment knob to set the length of time
you require and then press
MINUTE-MINDER
An audible signal will sound and the display will
indicate once the minuteminder has finished
counting down the selected time.
Please note: The minuteminder does not activate any of the
cooking cycles. Use the adjustment knob to change the time
set on the timer.
has
Once the minuteminder has been activated, you can
also select and activate a function. Turn the selection
knob to switch on the oven and then select the
function your require. Once the function has started,
the timer will continue to count down independently
without interfering with the function itself.
Please note: During this phase, it isn't possible to see the
minuteminder (only the
continue counting down in background. To retrieve the
minuteminder screen turn the selection knob to "0" to stop
the function that is currently active.
. KEYLOCK
To lock the keypad, press and hold
seconds. Do this again to unlock the keypad.
KEYLOCK
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched off at
any time by turning the selection knob to "0".
to show "Smart Clean" on
to activate the cleaning cycle.
to activate the timer.
icon will be displayed), that will
for at least five
Advertisement
Table of Contents
