Palmrest Assembly; Removing The Palmrest Assembly - Dell Latitude 9520 Series Service Manual

4. Connect the keyboard cable and backlight cable to the connectors on the touchpad.
5. Install the mylar adhesive sheet over the keyboard.
Next steps
1. Install the system board.
2. Install the I/O daughter
3. Install the system fan.
4. Install the display assembly.
5. Install the battery.
6. Install the speakers.
7. Install the WWAN card.
8. Install the solid-state
9. Install the base cover.
10. Install the SIM card.
11. Install the microSD card.
12. Follow the procedure in

Palmrest assembly

Removing the palmrest assembly

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the SIM card
4. Remove the base cover.
5. Remove the solid-state
6. Remove the WWAN card.
7. Remove the speakers.
8. Remove the battery.
9. Remove the display assembly.
10. Remove the system fan.
11. Remove the I/O daughter
12. Remove the power button.
13. Remove the system board.
14. Remove the keyboard.
About this task
The following images indicate the location of the palmrest and provide a visual representation of the removal procedure.
board.
drive.
After working on your
before working inside your
card.
tray.
drive.
board.
computer.
computer.
Removing and installing components 59