D-Link DCS-4701E User Manual page 35

Section 3: Configuration
ICR & IR
Use this section to configure the IR LED and IR-cut removable filter behavior
for your camera.
ICR
The Day/Night mode is set automatically. Generally, the camera uses Day
Automatic:
mode and switches to Night mode when needed. Use the Sensitivity drop-
down box to select when the camera should switch to Night mode. The text
to the right of the drop-down box shows what the current lighting conditions
are like, and you can refresh this information by clicking the Refresh button.
Day mode enables the IR Cut Filter and turns off the IR LEDs.
Day Mode:
Night mode disables the IR Cut Filter and turns on the IR LEDs.
Night Mode:
Set Day/Night mode using the schedule set in the drop-down boxes. The
Schedule
camera will enter Day mode at the starting time and return to Night mode
Mode:
at the ending time.
Activate the Disable IR LED to set Day mode for the set times.
IR Light
The camera can enable or disable the IR (infrared) light according to your
IR Light
preferences. This setting provides additional controls depending on your
Control:
specific application.
Disables the IR light.
Off:
Enables the IR light.
On:
The IR light will turn on when the ICR filter is disabled (night mode).
Sync With ICR:
The IR light will turn on or off according to the schedule that you specify
Schedule:
below.
D-Link DCS-4701E User Manual 35