Advertisement
4. When initialization is complete, this screen appears. Select OK.
NOTE: Selecting OK is optional. The screen will change on its own.
5. With the transmission in Neutral, turn the ignition to ON.
6. On the display, select HOME, then Settings.
7. Select Vehicle.
8. Select TPMS Calibration.
9. Select Calibrate. The message TPMS has been initialized will appear, and the display will return to the
customization menu screen. Once started, the calibration will complete on its own.
Under-Hood (Engine Idling)
12.
Do the PCM Idle Learn Procedure
To ensure a steady engine idle, do the PCM idle learn procedure after installing the No. 18 BACKUP (10 A) fuse.
1. Start the engine with the transmission in Neutral, and make sure all electrical items (A/C, audio unit, defogger,
lights, etc.) are turned off.
2. Wait for the engine to reach operating temperature (the cooling fans cycle twice).
3. Let the engine idle for 10 minutes with the throttle fully closed.
The PCM idle learn procedure must also be done after updating or replacing the PCM. If does not need to be done after
clearing DTCs.
Page 8 of 9
Advertisement
