Grease Lubrication - Makita XCU03 Instruction Manual

Grease lubrication

Interval of lubrication:
1. Remove 3 screws, and then remove the bottom cover.
1. Screw 2. Bottom cover
2. Remove the cap from the grease vessel, and then
turning the grease vessel.
1
1. Cover 2. Grease vessel
3.
(0.2 oz) as a guide).
4. Remove the grease vessel.
5. Attach the bottom cover, and then tighten 3 screws.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
accessories or attachments might present a risk of
for its stated purpose.
Center.
• Shear blade cover
• Chip receiver
• Grease vessel
2
1
2
NOTE:
MAKITA LIMITED WARRANTY
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
-
15 ENGLISH