Advertisement
Quick Links
•
PJLink trademark and logo are trademarks applied for registration or are already
registered in Japan, the United States of America and other countries and areas.
•
Crestron Connected is a registered trademark of Crestron Electronics, Inc. of the United
States.
•
AMX is a registered trademark of AMX LLC of the United States.
•
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
•
Other company and product names may be registered product names or trademarks of
their respective owners.
•
The contents of this manual are subject to change without notice.
•
This manual is published under strict quality control standards. Should you notice any
errors or other problems, please feel free to contact us about them.
•
Copying of this manual, either in part or its entirety is forbidden. You are allowed to use
these instructions for your own personal use. Any other use is forbidden without the
permission of CASIO COMPUTER CO., LTD.
•
CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims
from third parties arising out of the use of this product or this manual.
•
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to
loss of data due to malfunction or maintenance of this product, or due to any other
reason.
•
The sample screens shown in this manual are for illustrative purposes only, and may
not be exactly the same as the screens actually produced by the product.
•
Unless specifically stated otherwise, all illustrations in this manual show the
XJ-L8300HN projector.
Projector Wired LAN
Version 3.0
Keep this manual in a safe place future reference.
1
Advertisement
Related Manuals for Casio XJ-L8300HN
Summary of Contents for Casio XJ-L8300HN
- Page 1 • CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or due to any other reason.
- Page 2 XJ-L8300HN projector (hereinafter referred to collectively as "the Projector" or "this Projector") can be controlled from an external device via its LAN port. Connection Use a LAN cable to connect the Projector to a network device with which you want to establish a wired LAN connection.
- Page 3 A projector name query returns CASIO. • A manufacturer name query returns CASIO. • A device name query returns XJ-L8300HN. • The password used for the connection authentication process is admin. It is not possible to change the password or disable the authentication.
- Page 4 • IP address Specifies the controller IP address. • IP ID Specifies the controller IP ID. • Port Specifies the number of the port being used. (Always 41794) Enter the applicable information for each item and then click the [Send] button. This will restart the network function and apply the new settings.
- Page 5 NGN170710E-B...