Interface - Philips 223V5LSB/00 Service Manual

132 Meridian 5
(CEC Signal, not supported by this model)
CC170C
Input Low Voltage :
W8 LCD
Input High Voltage :
Output Low Voltage:
C
Output High Voltage: C
Pull-up Resistor:
Leakage Current in standby/off :
Maximum Capacitance:
4). DisplayPort ( option , refer to Quick specification table)
Follow
5). USB Hub 2.0 (option , refer to Quick specification table)
6). Audio in ( option , refer to Quick specification table)
Loudspeaker: stereo of RMS Power
Frequency range: (WAIT FOR SUPPLIER INPUT)
Headphone connection will mute speaker
7). USB PLUG (option , refer to Quick specification table)
8). HDMI audio out (headphone): (option, refer to Quick specification table)
Stereo, > 50mVrms for headphone of 32

3.2 Interface

3.2.1 D-Sub Cable
Length
Connector type : D-Sub male with DDC2B pin assignments.
Pin assignments:
Pin
1
2
3
4
5
6
7
8
3.2.2 DVI Cable(option)
The input signals are applied to the display through DVI-D cable.
Length
Connector type
White connector thumb-operated jackscrews
With transplant pin protective cover.
DisplayPort 1.1 specification.
USB port (1 upstream, 2 or 4 downstream)
Input signal: 1Vrms
USB port (1 upstream, 1 downstream), black jack color
: Please refer to M5 cable bundle summary file
Fix with monitor when packing, with transplant pin protective cover.
Blue connector thumb-operated jack screws
Signal Assignment
Red
Green/ SOG
Blue
Sense (GND)
Cable Detect (GND)
Red GND
Green GND
Blue GND
: Please refer to cable bundle summary file
: DVI-D male with DDC-2B pin assignments
< 0.8V
> 2.0V
0 – 0.4V
2.5V – 3.6V
2.7KΩ±10%
< 1.8uA
100pF
Pin Signal Assignment
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
13 H/H+V sync
14 V-sync
15 Data clock