Related Manuals for Philips 243S7EJMB/69
Summary of Contents for Philips 243S7EJMB/69
- Page 1 S line 223S7/243S7 www.philips.com/welcome EN User manual Customer care and warranty 22 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
4.1 Resolution & Preset Modes ..19 5. Power Management ....20 6. Customer care and warranty . 22 6.1 Philips’ Flat Panel Monitors Pixel Defect Policy ....22 6.2 Customer Care & Warranty ..25 7. Troubleshooting & FAQs ..26 7.1 Troubleshooting ......26... -
Page 3: Important
• Please use approved power cord and production number of the product. provided by Philips all the time. If your power cord is missing, please contact with your local service 1.1 Safety precautions and center. - Page 4 1. Important be better than a 15-minute break not expose the monitor to dust, every two hours. Try to keep your rain, water, or excessive moisture eyes from eye strain while using the environment. screen for a constant period of time • If your monitor gets wet, wipe it with by : dry cloth as soon as possible.
-
Page 5: Notational Descriptions
1. Important Warning 1.2 Notational Descriptions Failure to activate a screen saver, or The following subsections describe a periodic screen refresh application notational conventions used in this may result in severe “burn-in” or “after- document. image” or “ghost image” symptoms that will not disappear and cannot be Notes, Cautions and Warnings repaired. -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. (2) Use a screwdriver to tighten the Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. - Page 8 2. Setting up the monitor Connecting to your PC 223S7EJMB： 2X3S7EHMB： Kensington anti-theft lock Earphone jack Audio input Kensington anti-theft lock VGA input Earphone jack HDMI input Audio input AC power input VGA input HDMI input 2X3S7EYMB： DisplayPort input USB downstream USB upstream AC power input Kensington anti-theft lock...
-
Page 9: Operating The Monitor
2. Setting up the monitor 243S7EJMB： 2.2 Operating the monitor Description of the control buttons Kensington anti-theft lock Earphone jack Audio input VGA input Switch monitor’s power ON and OFF. HDMI input Access the OSD menu. DisplayPort input Confirm the OSD USB upstream adjustment. - Page 10 What is On-Screen Display (OSD)? Input On-Screen Display (OSD) is a feature HDMI (2X3S7EHMB) in all Philips LCD monitors. It allows an HDMI 1.4 (2X3S7EJMB) DisplayPort (2X3S7EYMB, 2X3S7EJMB) end user to adjust screen performance or select functions of the monitors...
- Page 11 2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 ×...
-
Page 12: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor 2.3 Remove the Base Assembly Note This monitor accepts a 100mm x for VESA Mounting 100mm Before you start disassembling the VESA-Compliant mounting interface. monitor base, please follow the VESA Mounting Screw M4. Always instructions below to avoid any possible contact manufacturer for wall-mount damage or injury. -
Page 13: Softblue Technology Introduction
2. Setting up the monitor 2.4 SoftBlue Technology introduction SoftBlue LED technology uses a smart technology to reduce harmful shortwave blue light without affecting the color or image of the display. SoftBlue LED technology is certified by international testing organizations TUV Rheinland to reduce harmful blue light. -
Page 14: Image Optimization
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes • EasyRead: Helps improve reading the content displayed on your screen. of text based application like PDF Based on a scenario you select, ebooks. -
Page 15: Smartcontrast
LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by SmartImage. -
Page 16: Technical Specifications
4.Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight 223S7: 21.5" W (54.6 cm) Panel Size 243S7: 23.8" W (60.5 cm) Aspect Ratio 16:9 223S7: 0.248 x 0.248 mm Pixel Pitch 243S7: 0.275 x 0.275 mm Contrast Ratio (typ.) 1,000:1 Optimum Resolution 1920 x 1080 @ 60 Hz... - Page 17 4.Technical Specifications Stand Tilt -5 / +25 degree Swivel -175 / +175 degree Height adjustment 130mm Pivot 90 degree Power (223S7EHMB) AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 60Hz 115VAC , 60Hz 230VAC, 50Hz Normal Operation 20.6 W (typ.)
- Page 18 4.Technical Specifications Power (223S7EJMB) AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 60Hz 115VAC , 60Hz 230VAC, 50Hz Normal Operation 21.3 W (typ.) 20.7 W (typ.) 21.52 W (typ.) Sleep (Standby) <0.5W <0.5W <0.5W <0.3W <0.3W...
- Page 19 4.Technical Specifications AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 60Hz 115VAC , 60Hz 230VAC , 50Hz 76.79 BTU/hr 75.09 BTU/hr 74.4 BTU/hr Normal Operation (typ.) (typ.) (typ.) Sleep (Standby) <1.71 BTU/hr <1.71 BTU/hr <1.71 BTU/hr <1.02 BTU/hr...
- Page 20 500 to 1060hPa (Non-operation) Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 21: Resolution & Preset Modes
4.Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 1920 x 1080 @ 60 Hz (analog input) 1920 x 1080 @ 60 Hz (digital input) Recommended Resolution 1920 x 1080 @ 60 Hz (digital input) H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400... -
Page 22: Power Management
5.Power Management 223S7EJMB 5. Power Management Power Management Definition If you have VESA DPM compliance display card or software installed in your PC, the VESA Power Video H-sync V-sync Mode Used Color monitor can automatically reduce its power consumption when not in use. If an input 20.7W from a keyboard, mouse or other input (typ.) - Page 23 5.Power Management 243S7EJMB Power Management Definition VESA Power Video H-sync V-sync Mode Used Color 22.8W (typ.) Active White (max.) Sleep 0.5W White (Standby) (typ.) (blink) 0.3W (typ.) The following setup is used to measure power consumption on this monitor. • Native resolution: 1920 × 1080 • Contrast: 50% • Brightness: 100% • Color temperature: 6500k with full...
-
Page 24: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 25 Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel).
- Page 26 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
-
Page 27: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 28: Troubleshooting & Faqs
• Disconnect the monitor from mains • First, ensure that the power button power source immediately for safety on the front of the monitor is in the • Contact with Philips customer OFF position, then press it to the service representative immediately. ON position. - Page 29 Service contact information listed in may cause "burn in", also known as Important information manual and "after-imaging " or "ghost imaging", contact Philips customer service on your screen. "Burn-in", "after- representative. imaging", or "ghost imaging" is a * Functionality different according to well-known phenomenon in LCD display.
-
Page 30: General Faqs
• Shut down your computer, that the panel surface is not disconnect your old monitor and subjected to excessive shocks reconnect your Philips LCD monitor. and is protected from sharp or blunt objects. When handling the • Turn on your monitor and then turn monitor, make sure that there is on your PC. - Page 31 Can I connect my LCD monitor to image” or “ghost image” symptoms any PC, workstation or Mac? that will not disappear and cannot be Ans.: Yes. All Philips LCD monitors are repaired. The damage mentioned above fully compatible with standard is not covered under your warranty.
- Page 32 “Attention” to show the unlock/lock status as shown below illustrators. Monitor controls locked Monitor control unlocked Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
- Page 33 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.