Advertisement
Install Guide Steps
PICO-KBU4-SEMI Quick Installation Guide
Step 1: On the thermal assembly, remove the plastic covering as shown.
Step 2: Place the top chassis onto the thermal assembly. Note the orientation of the chassis with the thermal
assembly. Secure with four black screws.
Step 3: On the PICO-APL4 board, remove the nut and washer from the power input port.
Step 4: Connect the thermal fan cable to the
PICO-APL4 board as shown.
Step 6: Check that the I/O ports are properly aligned. Secure board with four nickel screws.
Step 5: Insert the PICO-APL4 board into the chassis
assembly with the processor side toward the thermal
assembly. DO NOT place the CMOS battery between
the board and thermal assembly.
Advertisement
