7. Click the Save button
8. The Create Service dialog displays. Click OK, and the service is automatically
created for you.
Note: You can select Open Wizard to check or change the controls points as
needed.
9. Configure rules to work with your thermostat.
Configuring rules with TCC thermostats
Configure a rule for your thermostat. The example below shows how to set a rule
for alerting the customer of the home's temperature. If the thermostat reaches
above 72°F, an email notification is sent.
To create a rule for the TCC thermostat in Fusion:
1. Access your project, and then click the Rules tab.
2. Click the New Rule button
3. Enter a name for the rule, and then select the Enable Rule checkbox.
Doc ID - 1188 • Rev 04
.
.
6 / 8