Cisco SRW208 User Manual page 20

Chapter 4
SSL Certificate Generation
Show Certificate
Use the Show Certificate screen to display the internal
certificate.
SSL Certificate
Disable Active Management Profile
Selecting this option will prompt you to confirm that you
want to disable the Active Management Profile.
IP Configuration
The IP Configuration screen displays these choices: the
Switch's IP Address Settings, HTTP, HTTPS Configuration
and Network Configuration.
IP Configuration
8-Port 10/100 Ethernet Switch with Webview
Configuration Using the Console Interface
IP Address Configuration
The IP Address Settings screen allows you to set the IP
information for the Switch.
IP Address Configuration
IP Address The IP Address of the Switch is displayed. (The
default IP address is 192.168.1.254.) Verify that the address
you enter is correct and does not conflict with another
device on the network.
Subnet Mask The subnet mask of the Switch is
displayed.
Default Gateway
The IP address of your network's
default gateway is displayed.
Management VLAN The VLAN ID number is displayed.
DHCP client The status of the DHCP client is displayed.
If you want the Switch to be a DHCP client, then select
ENABLE. If you want to assign an static IP address to the
Switch, then enter the IP settings and select DISABLE.
Select Edit to make changes. When your changes are
complete, press the Esc key to return to the Action menu,
and select Save to save your changes.
HTTP
The HTTP screen displays the status and port number of
the HTTP Server.
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.
14