Reversing The Door - Buffalo FS130 Instruction Manual

Reversing the door

Depending on the location of the appliance, it may be necessary to change the direction the door opens.
1.Fully open the door, unscrew the hinge
frame with a screwdriver and remove
the door and hinge frame together
from the appliance.
3.Turn the door over 180° and push the
door axle hole towards the hinge frame.
Carbon filter replacing
Carbon filter needs to be replaced annually.
1.Unscrew the cover of the back panel with
a screwdriver and remove the cover.
3.Install the filter frame back in place.
2.Install the hinge frame from the lower
left corner to the right upper corner
and tighten the screws.
4.Insert the hinge frame from the upper
left corner to the bottom right and
tighten the screws.
2.Take out the filter frame rack and replace
it with a new carbon filter.
4.Put the cover back on and tighten the screws