Maytag MHW8000Y Use & Care Manual page 8

Front-loading automatic washer
Table of Contents

Advertisement

Available languages

Available languages

CYCLE GUIDE — SPECIAL–PURPOSE CYCLES
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
Items to wash
Cycle:
using default
cycle settings:
Small loads of 3–4
Small Load
lightly soiled garments
Swimwear, items
Rinse/Drain
that need rinsing only
& Spin
Wet load of clothes
Rinse/Drain
& Spin
Heavily soiled garments
No clothes in washer
Clean Washer
with affresh
* All temperature selections feature a Cold rinse, except Warm*, which features a warm wash and a warm rinse.
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
8
Wash
Temperature*:
Hot
Warm
Cold
Warm*
Warm
Cold
N/A
Soak
Warm*
Warm
Cold
®
Small load: Fill the washer drum with 3–4 items, not more than 1/4 full.
Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
Spin
Soil
Available
Speed:
Level:
Options:
High
Heavy
Extra Rinse
Normal
Medium
Fresh Hold
Low
Light
Delay Start
Extra Low
High
Extra Rinse
N/A
Medium
Fresh Hold
Low
Delay Start
Extra Low
No Spin
High
N/A
Fresh Hold
Medium
Delay Start
Low
Extra Low
No Spin
Extra Heavy
Delay Start
Heavy
Normal
Light
Cycle Details:
For small loads (3-4 items) needed
quickly. This cycle combines
®
high-speed tumbling, a shortened
wash time, and a high-speed spin
for reduced drying times.
This cycle adds water, then uses
high-speed tumbling and an extra
®
high-speed spin. For some fabrics,
you may wish to set the spin speed
to a lower setting.
Use Drain & Spin to remove excess
®
water from the load by choosing
Rinse/Drain & Spin and turning off
Extra Rinse. Spin speed can be set
to a lower setting.
Provides an extended soak without
a final spin to help loosen tough
stains prior to a wash cycle.
Use monthly with affresh
to clean the interior of the washer.
Make sure no clothes are in washer.
The Clean Washer light will flash
every 30 loads to remind you to run
the Clean Washer cycle.
Cleaner
®

Advertisement

Table of Contents
loading

Table of Contents