Honeywell HUS-D4-E-Pro User Manual page 22

HUS-D4-E-Pro User Guide
Figure 4-3 Network Setting
Static IP: Select "Link Type: Static IP". Enter IP address, Subnet
Mask and Default Gateway manually and then click Update. If the
IP address is configured successfully, login page would be
displayed automatically. If the new IP address is not on the same
network segment with the network client computer, the network
client computer should be configured to the new network
segment in order to access to the decoder.
DHCP: Select "Link Type: DHCP" and click Update, the system will
assign a new IP address to the decoder automatically. A message
would pop up to inform the user to log in again after successful
setting.
Make sure that DHCP server is available before
choosing DHCP mode.
Date/Time
To set date and time, select System configurationDate/Time.
14