Customizing The Self-Timer - Canon Powershot SD970 IS Digital Elph User Manual

$ Customizing the Self-Timer

You can set the time delay (0 – 30 seconds) and the number of shots taken
(1 – 10 shots).
What if the number of shots is set to two or more shots?
•
Exposure and white balance settings are set with the first shot.
•
When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
•
If the flash fires, the shooting interval may be longer.
•
If you set a high number of shots, the shooting interval may be longer.
•
If the memory card becomes full, shooting stops automatically.
Select $.
After pressing the p button, press the
●
op buttons or turn the  dial to select
$, then immediately the press the n
button.
Select the settings.
Press the op buttons to select [Delay] or
●
[Shots].
Press the qr buttons or turn the  dial
●
to select a value, then press the m
button.
●
Follow Step 3 on page 63 to shoot.
79